;; ┌────────────────────────────────────────────────────────────┐ ;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ ;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ ;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ ;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ ;; └────────────────────────────────────────────────────────────┘ ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ;; Global WM Settings [global/wm] ; Adjust the _NET_WM_STRUT_PARTIAL top value ; Used for top aligned bars margin-bottom = 0 ; Adjust the _NET_WM_STRUT_PARTIAL bottom value ; Used for bottom aligned bars margin-top = 0 ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ;; Bar Settings [bar/main] ; Use either of the following command to list available outputs: ; If unspecified, the application will pick the first one it finds. ; $ polybar -m | cut -d ':' -f 1 ; $ xrandr -q | grep " connected" | cut -d ' ' -f1 monitor = ; Use the specified monitor as a fallback if the main one is not found. monitor-fallback = ; Require the monitor to be in connected state ; XRandR sometimes reports my monitor as being disconnected (when in use) monitor-strict = false ; Tell the Window Manager not to configure the window. ; Use this to detach the bar if your WM is locking its size/position. override-redirect = false ; Put the bar at the bottom of the screen bottom = false ; Prefer fixed center position for the `modules-center` block ; When false, the center position will be based on the size of the other blocks. fixed-center = true ; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), ; the percentage can optionally be extended with a pixel offset like so: ; 50%:-10, this will result in a width or height of 50% minus 10 pixels width = 100% height = 30 ; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) ; the percentage can optionally be extended with a pixel offset like so: ; 50%:-10, this will result in an offset in the x or y direction ; of 50% minus 10 pixels offset-x = 0 offset-y = 0 ; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) background = ${color.bg} ; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) foreground = ${color.fg} ; Background gradient (vertical steps) ; background-[0-9]+ = #aarrggbb ;;background-0 = ; Value used for drawing rounded corners ; Note: This shouldn't be used together with border-size because the border ; doesn't get rounded ; Individual top/bottom values can be defined using: ; radius-{top,bottom} radius-top = 0.0 radius-bottom = 0.0 ; Under-/overline pixel size and argb color ; Individual values can be defined using: ; {overline,underline}-size ; {overline,underline}-color ;;overline-size = 0 ;;overline-color = ${color.ac} ; Values applied to all borders ; Individual side values can be defined using: ; border-{left,top,right,bottom}-size ; border-{left,top,right,bottom}-color ; The top and bottom borders are added to the bar height, so the effective ; window height is: ; height + border-top-size + border-bottom-size ; Meanwhile the effective window width is defined entirely by the width key and ; the border is placed withing this area. So you effectively only have the ; following horizontal space on the bar: ; width - border-right-size - border-left-size ;;border-size = 2 ;;border-color = ${color.ac} ; Number of spaces to add at the beginning/end of the bar ; Individual side values can be defined using: ; padding-{left,right} padding = 0 ; Number of spaces to add before/after each module ; Individual side values can be defined using: ; module-margin-{left,right} module-margin-left = 0 module-margin-right = 0 ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ; Fonts are defined using ; ; Font names are specified using a fontconfig pattern. ; font-0 = NotoSans-Regular:size=8;2 ; font-1 = MaterialIcons:size=10 ; font-2 = Termsynu:size=8;-1 ; font-3 = FontAwesome:size=10 ; See the Fonts wiki page for more details font-0 = "Noto Sans:size=9;3" font-1 = "Iosevka Nerd Font:size=12;3" font-2 = "Iosevka Nerd Font:size=16;4" ; Modules are added to one of the available blocks ; modules-left = cpu ram ; modules-center = xwindow xbacklight ; modules-right = ipc clock modules-left = menu sep2 term web files settings modules-center = modules-right = style sep alsa battery network date sep sysmenu ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ; The separator will be inserted between the output of each module separator = ; Opacity value between 0.0 and 1.0 used on fade in/out dim-value = 1.0 ; Value to be used to set the WM_NAME atom ; If the value is empty or undefined, the atom value ; will be created from the following template: polybar-[BAR]_[MONITOR] ; NOTE: The placeholders are not available for custom values wm-name = ; Locale used to localize various module data (e.g. date) ; Expects a valid libc locale, for example: sv_SE.UTF-8 locale = ; Position of the system tray window ; If empty or undefined, tray support will be disabled ; NOTE: A center aligned tray will cover center aligned modules ; ; Available positions: ; left ; center ; right ; none tray-position = none ; If true, the bar will not shift its ; contents when the tray changes tray-detached = false ; Tray icon max size tray-maxsize = 16 ; Background color for the tray container ; ARGB color (e.g. #f00, #ff992a, #ddff1023) ; By default the tray container will use the bar ; background color. tray-background = ${color.background} ; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) tray-offset-x = 0 tray-offset-y = 0 ; Pad the sides of each tray icon tray-padding = 0 ; Scale factor for tray clients tray-scale = 1.0 ; Restack the bar window and put it above the ; selected window manager's root ; ; Fixes the issue where the bar is being drawn ; on top of fullscreen window's ; ; Currently supported WM's: ; bspwm ; i3 (requires: `override-redirect = true`) ;;wm-restack = ; Set a DPI values used when rendering text ; This only affects scalable fonts ; dpi = ; Enable support for inter-process messaging ; See the Messaging wiki page for more details. enable-ipc = true ; Fallback click handlers that will be called if ; there's no matching module handler found. click-left = click-middle = click-right = scroll-up = scroll-down = double-click-left = double-click-middle = double-click-right = ; Requires polybar to be built with xcursor support (xcb-util-cursor) ; Possible values are: ; - default : The default pointer as before, can also be an empty string (default) ; - pointer : Typically in the form of a hand ; - ns-resize : Up and down arrows, can be used to indicate scrolling cursor-click = cursor-scroll = ;; WM Workspace Specific ; bspwm ;;scroll-up = bspwm-desknext ;;scroll-down = bspwm-deskprev ;;scroll-up = bspc desktop -f prev.local ;;scroll-down = bspc desktop -f next.local ;i3 ;;scroll-up = i3wm-wsnext ;;scroll-down = i3wm-wsprev ;;scroll-up = i3-msg workspace next_on_output ;;scroll-down = i3-msg workspace prev_on_output ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ;; Application Settings [settings] ; The throttle settings lets the eventloop swallow up til X events ; if they happen within Y millisecond after first event was received. ; This is done to prevent flood of update event. ; ; For example if 5 modules emit an update event at the same time, we really ; just care about the last one. But if we wait too long for events to swallow ; the bar would appear sluggish so we continue if timeout ; expires or limit is reached. throttle-output = 5 throttle-output-for = 10 ; Time in milliseconds that the input handler will wait between processing events ;throttle-input-for = 30 ; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events screenchange-reload = false ; Compositing operators ; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t compositing-background = source compositing-foreground = over compositing-overline = over compositing-underline = over compositing-border = over ; Define fallback values used by all module formats ;format-foreground = ;format-background = ;format-underline = ;format-overline = ;format-spacing = ;format-padding = ;format-margin = ;format-offset = ; Enables pseudo-transparency for the bar ; If set to true the bar can be transparent without a compositor. pseudo-transparency = false ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ;; ┌────────────────────────────────────────────────────────────┐ ;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│ ;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│ ;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│ ;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ ;; └────────────────────────────────────────────────────────────┘ ;; ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ [color] ;; Active Colors bg = #232832 bg-alt = #1C2028 fg = #EAEAEA fg-alt = #9C9C9C trans = #00000000 white = #FFFFFF black = #000000 ;; Material Colors red = #e53935 pink = #d81b60 purple = #8e24aa deep-purple = #5e35b1 indigo = #3949ab blue = #1e88e5 light-blue = #039be5 cyan = #00acc1 teal = #00897b green = #43a047 light-green = #7cb342 lime = #c0ca33 yellow = #fdd835 amber = #ffb300 orange = #fb8c00 deep-orange = #f4511e brown = #6d4c41 grey = #757575 blue-gray = #546e7a ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ ;; ┌────────────────────────────────────────────────────────────────┐ ;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ ;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ ;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ ;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ ;; └────────────────────────────────────────────────────────────────┘ ;; ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ [module/alsa] type = internal/alsa ; You can find the different card numbers in `/proc/asound/cards` ;;master-soundcard = default ;;speaker-soundcard = default ;;headphone-soundcard = default ; Default: Master ;;master-mixer = Master ; Optionally define speaker and headphone mixers ; Default: none ;;speaker-mixer = Speaker ; Default: none ;;headphone-mixer = Headphone ; Default: 5 ;;interval = 5 ; Available tags: ; (default) ; ; format-volume = format-volume-background = ${color.bg-alt} format-volume-padding = 2 ; Available tags: ; (default) ; ; format-muted = format-muted-background = ${color.bg-alt} format-muted-padding = 2 ; Available tokens: ; %percentage% (default) label-volume = %percentage%% ; Available tokens: ; %percentage% (default label-muted = ﱝ label-muted-foreground = ${color.fg-alt} ramp-volume-0 =  ramp-volume-1 =  ramp-volume-2 =  ramp-volume-3 =  ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ [module/battery] type = internal/battery full-at = 99 ; $ ls -1 /sys/class/power_supply/ battery = BAT1 adapter = ACAD poll-interval = 2 time-format = %H:%M ; Available tags: ; (default) ; ; ; format-charging = format-charging-background = ${color.bg-alt} format-charging-padding = 2 ; Available tags: ; (default) ; ; ; format-discharging = format-discharging-background = ${color.bg-alt} format-discharging-padding = 2 ; Available tags: ; (default) ; ; format-full = format-full-background = ${color.bg-alt} format-full-padding = 2 ; Available tokens: ; %percentage% (default) ; %time% ; %consumption% (shows current charge rate in watts) label-charging = %percentage%% ; Available tokens: ; %percentage% (default) ; %time% ; %consumption% (shows current discharge rate in watts) label-discharging = %percentage%% ; Available tokens: ; %percentage% (default) ;label-full = Fully Charged label-full =  label-full-foreground = ${color.green} ramp-capacity-0 =  ramp-capacity-1 =  ramp-capacity-2 =  ramp-capacity-3 =  ramp-capacity-4 =  ramp-capacity-5 =  ramp-capacity-6 =  ramp-capacity-7 =  ramp-capacity-8 =  ramp-capacity-9 =  animation-charging-0 =  animation-charging-1 =  animation-charging-2 =  animation-charging-3 =  animation-charging-4 =  animation-charging-5 =  animation-charging-6 =  ; Framerate in milliseconds animation-charging-framerate = 750 ;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ [module/date] type = internal/date interval = 1.0 time = %I:%M %p ;;time-alt = %B %d, %Y format =